Diesel Performance Parts

Step 1: Select the Make of your vehicle from the list below.
Step 2: Select your Engine Model.
Step 3: Select the Part Type you’re looking for.
Step 4: Click Find Parts to see all available parts that match your search criteria.

All prices include GST

Piston Set STD

Part Number: PONI131 STD | Status: Available

Standard replacement piston set (6 pistons) to suit Nissan TD42T/Ti engines. Pistons include pins and circlips. These pistons are strutted, oil gallery cooled and have an alfin insert in the top ring groove. Top ring 2.5 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 3.0 mm, Gudgeon pin diameter: 30.0 mm. Piston ring set required RSNI131 STD. Sold as an engine set. (DPP brand - made in Taiwan)

$720.72 inc. GST

View Part

Piston Set STD Pre-topped 0.15 mm

Part Number: PONI131P STD | Status: Available

Standard replacement piston set (6 pistons), pre-topped 0.15 mm to suit Nissan TD42T/Ti engines. Pistons include pins and circlips. These special pistons (which are not offered by OE) have been designed to compensate for the decking of the block. These pistons are strutted, oil gallery cooled and have an alfin insert in the top ring groove. Top ring 2.5 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 3.0 mm, Gudgeon pin diameter: 30.0 mm. Piston ring set required RSNI131 STD. Sold as an engine set. (DPP brand - made in Taiwan)

$748.44 inc. GST

View Part

Piston STD Performance, anodised crown, ceramic coated crown & moly- teflon coated skirts

Part Number: PONI131CA STD | Status: Available

Performance piston to suit Nissan TD42T/Ti engines. The piston crowns are hard anodised and then ceramic coated, the skirts are coated with MoS2/Teflon. The non-porous ceramic crown coating can withstand temperatures of up to 1300C and pressures of up to 69,000 kPa (10,000 psi). This helps to keep the piston cooler, which can help prevent it from softening and failing from high combustion chamber temperatures. The MoS2 skirt coating contains Teflon and is a dry film lubricant. It adds 0.025 mm (0.001") to the skirt diameter and can withstand temperatures of up to 600C. It will help prevent piston scuffing in the bores in most marginal lubrication conditions. Reduced heat loss to the piston equates to better fuel burn rates, and increased power and fuel economy. Piston includes 30 mm gudgeon pin and circlips. This piston is strutted, oil gallery cooled and has an alfin insert in the top ring groove. Piston ring set required RSNI131 STD. Sold as an engine set. (DPP brand - Pistons are made in Taiwan. The ceramic and Moly/Teflon coatings are applied in Australia)

$1,155.00 inc. GST

View Part

Piston STD Performance, Pre-topped 0.15 mm, anodised crown, ceramic coated crown & moly- teflon coated skirts

Part Number: PONI131PCA STD | Status: Available

Performance pre-topped 0.15 mm piston to suit Nissan TD42T/Ti engines. This special piston (which is not offered by OE) has been designed to compensate for the decking of the block. The piston crowns are hard anodised and then ceramic coated, the skirts are coated with MoS2/Teflon. The non-porous ceramic crown coating can withstand temperatures of up to 1300C and pressures of up to 69,000 kPa (10,000 psi). This helps to keep the piston cooler, which can help prevent it from softening and failing from high combustion chamber temperatures. The MoS2 skirt coating contains Teflon and is a dry film lubricant. It adds 0.025 mm (0.001") to the skirt diameter and can withstand temperatures of up to 600C. It will help prevent piston scuffing in the bores in most marginal lubrication conditions. Reduced heat loss to the piston equates to better fuel burn rates, and increased power and fuel economy. Piston includes 30 mm gudgeon pin and circlips. This piston is strutted, oil gallery cooled and has an alfin insert in the top ring groove. Piston ring set required RSNI131 STD. Sold as an engine set. (DPP brand - Pistons are made in Taiwan. The ceramic and Moly/Teflon coatings are applied in Australia)

$1,155.00 inc. GST

View Part

Rocker Shaft

Part Number: RANI130 | Status: Available

Replacement Rocker Shaft to suit Nissan TD42 engines.
(Manufactured in Australia – DPP brand)

Note: The OE part has been discontinued by Nissan and is no longer available.

$715.00 inc. GST

View Part

Seal Front Main Oil – Ute/Pass

Part Number: SLFIS330 | Status: Available

Front crankshaft seal, radial type, 50x68x9. Suits Ute and Passenger vehicles with Isuzu 4JJ1TC engines.

$20.02 inc. GST

View Part

Seal Front Main Oil – “N” series up to 07/2010

Part Number: SLFIS330B | Status: Available

Front crankshaft seal to suits "N" series trucks up to 07/2010 with Isuzu 4JJ1TC engines. Axial type, 50x68x7/11. (NOK brand) If Slinger is required use SSFIS330

$32.65 inc. GST

View Part

Seal Slinger – “N” series up to 07/2010

Part Number: SSFIS330 | Status: Available

Slinger to suit "N" series truck up to 07/2010 with Isuzu 4JJ1TC engine. Requires special tool for installation (tool hire available) (Genuine - Made in Japan)

$6.38 inc. GST

View Part

Seal Front Main Oil

Part Number: SLFTO330A | Status: Available

Front crankshaft seal to suit Toyota 1HZ, 1HZ-T and 1HD-T. Viton. ID 58 x OD 75 x Depth 9/14.5 mm. RH Helix. (NOK - made in Japan)

$20.79 inc. GST

View Part

Seal Front Main Oil

Part Number: SLFFO744 | Status: Available

Front crankshaft seal to suit Ford Ranger, Mazda BT-50 - Oct 2011 onwards, and Everest - Oct 2015 onwards with P5AT/DT32 (5Cyl, 3.2L) engines. PTFE (Teflon material). Includes fitting sleeve. (made in Spain)

$43.12 inc. GST

View Part

Seal Front Main Oil – “N” series 08/2010 onwards

Part Number: SLFIS330C | Status: Available

Front crankshaft seal, axial type / metal slinger, 73x96x9/13. Suits "N" series trucks, 08/2010 onwards, with Isuzu 4JJ1TC engines.

$53.13 inc. GST

View Part

Seal Rear Main Oil

Part Number: SLRTO330A | Status: Available

Rear crankshaft seal to suit Toyota 1HZ, 1HZ-T and 1HD-T. Viton. ID 95 x OD 115 x Depth 9.5/12 mm. LH Helix. (NOK brand - made in Japan)

$30.03 inc. GST

View Part

Seal Rear Main Oil

Part Number: SLRFO744 | Status: Available

Rear crankshaft seal to suit Ford Ranger, Mazda BT-50 - Oct 2011 onwards, and Everest - Oct 2015 onwards with P5AT/DT32 (5Cyl, 3.2L) engines. PTFE (Teflon material). Unitised seal in steel housing. Includes fitting sleeve. (made in Spain)

$70.22 inc. GST

View Part

Seal Rear Main Oil

Part Number: SLRIS265A | Status: Available

Rear crankshaft seal, axial type / metal slinger, 95x118x10. Suits Isuzu 4JJ1TC engines. Requires special tool to fit (tool hire available)

$40.81 inc. GST

View Part

Seal Cam

Part Number: SLCTO330 | Status: Available

Cam seal to suit Toyota 1HZ, 1HZ-T and 1HD-T. Viton. ID 32mm x OD 46mm x Depth 6. RH Helix. (CHO brand- Made in Taiwan)

$5.31 inc. GST

View Part

Seal Front Main Oil

Part Number: SLFNI131A | Status: Available

Front crankshaft seal to suit Nissan TD42T/Ti. Viton. ID 60 x OD 80 x Depth 7 mm. Press in radial seal. (Genuine Nissan - made in Japan)

$20.02 inc. GST

View Part

Seal Rear Main Oil 86 mm

Part Number: SLRNI130 | Status: Available

Rear crankshaft seal to suit Nissan TD42. Shaft 86 mm. Unitised seal in aluminium housing. (KP brand - made in Japan)

$71.15 inc. GST

View Part

Seal Rear Main Oil 96 mm

Part Number: SLRNI131A | Status: Available

Rear crankshaft seal to suit Nissan TD42T/Ti. Shaft 96 mm. Unitised seal in aluminium housing. (Genuine Nissan - made in Japan)

$126.28 inc. GST

View Part

Thermostat 77C/170F

Part Number: WVTO330 | Status: Available

Thermostat to suit Toyota 1HZ, 1HZ-T, 1HD-T series. 77C/170F. O-ring not included. (Kuzeh Brand (OEM) - made in Japan)

$28.18 inc. GST

View Part

Thermostat 82C/180F

Part Number: WVNI305 | Status: Available

Thermostat to suit Nissan TD42 series. 82C/180F. (Dayco brand)

$18.48 inc. GST

View Part

Get in Touch

Contact our friendly team of experts at Engine Australia today for more information.

Have a question? Call our friendly team of experts today on 1300 ENGINE