Sealant and Threadlock Cross Reference Chart |
NOTE: All sealants and cements work best if the job is prepared with a suitable primer first. |
GASKETING - RTV, etc. |
Loctite® | ThreeBond® | Function - Description |
518 Auto Gasket | SS1 | Auto Gasket - Flange Sealant | An anaerobic (cures in the absence of air) sealant. Multi-purpose - flexible. Sensor Safe. May be used to coat existing gaskets. Ideal for crankcases on motorcycles, outboards, chainsaws etc. Ideal for sealing water pump and oil pump faces to engine. Will accommodated small expansion differentials. Temperature range: -55ºC - + 150ºC. Tested to 34.5 MPa (5,000 psi). Excellent chemical resistance. |
|
587 Blue Maxx Silicone | SS1 (Grey) | Form-In-Place-Gasket (FIPG) | RTV Silicone, oxime base, blue in colour. Sensor Safe. Low-odour, low volatile, no-corrosive. Outstanding hot oil resistance. Superior flexibility - 8 times more flexible than cork/rubber compounds. Use to replace or dress pre-cut gaskets and seals. Ideal for oil pans, rocker covers, timing covers etc. Use where relative movement causes failure in conventional gaskets. Not suitable for use in contact with petroleum fuels. Not suitable for exhaust systems and head gaskets. Temperature range: -60ºC - +260ºC. Fills gaps to 6 mm (0.240"). |
|
5900 Black Maxx Silicone | 1207B (Black) | Form-In-Place-Gasket (FIPG) | RTV Silicone, oxime base, black in colour. Sensor Safe. Low-odour, low volatile, no-corrosive. Outstanding hot oil resistance. Superior flexibility. Ideal for oil pans, rocker covers, timing covers, intake manifold end seals, transmission pans etc. Not suitable for use in contact with petroleum fuels. Not suitable for exhaust systems and head gaskets. Temperature range: -60ºC - +200ºC. Fills gaps to 6 mm (0.240"). |
|
5699 Grey Maxx Silicone | 1215, 1216, 1207C, 1207D | Form-In-Place-Gasket (FIPG) | RTV Silicone, oxime base, grey in colour. Sensor Safe. Low-odour, low volatile, no-corrosive. Designed specifically for Japanese engineered vehicles. Outstanding hot oil and coolant resistance. Superior flexibility. Ideal for oil pans, rocker covers, intake manifolds, etc. Not suitable for exhaust systems and head gaskets. Temperature range: -60ºC - +200ºC. Fills gaps to 3 mm (0.120"). |
|
5920 Copper Maxx Hi-Temp Silicone | | High-Temperature, Form-In-Place-Gasket (FIPG) | RTV Silicone, oxime base, copper in colour. For high performance vehicles. Sensor Safe. Low-odour, low volatile, no-corrosive. Outstanding hot oil resistance. Superior flexibility. Ideal for oil pans, rocker covers, intake manifolds, thermostat housings, turbochargers, etc. Not suitable for exhaust systems and head gaskets. Temperature range: -60ºC - +316ºC. Fills gaps to 6 mm (0.240"). |
|
Hi-Temp Red | 1207C (Red) | High-Temperature, Form-In-Place-Gasket (FIPG) | RTV Silicone, red in colour. Replaces gaskets of almost any size or shape. Tough, flexible. Ideal for oil pans, rocker covers, intake manifolds, timing coverts, thermostat housings etc. Not suitable for exhaust systems and head gaskets. Temperature range: -60ºC - +343ºC. |
|
Blue | | Form-In-Place-Gasket (FIPG) | RTV Silicone, oxime base, blue in colour. Sensor Safe. Replaces gaskets of almost any size or shape. Ideal for oil pans, rocker covers, intake manifolds, thermostat housings etc. Can be used to seal or coat cut gaskets. Not suitable for exhaust systems and head gaskets. Temperature range: -55ºC - +260ºC. |
|
No.1 Gasket Sealant | | Rigid Flange Sealant | Fast drying. Hard setting. Designed for sealing rigid flange materials. Resists common automotive fluids. Suitable for core plugs, threaded connections, manifold gaskets etc. Temperature range: -55ºC - +204ºC inter. |
|
No.2 Gasket Sealant | | Flange Sealant | Slow drying. Non-hardening gasket sealant. Allows for dismantling if necessary. Suitable for rocker cover gaskets, oil pan gaskets etc. Temperature range: -55ºC - +204ºC. |
|
No.3 Aviation Gasket Sealant | 1102 (Yellow) | Flange Sealant | Slow drying. Non-hardening gasket sealant. Convenient brush top can. Approved for aviation use. Allows for dismantling if necessary. Suitable for close fitting machined surfaces, sealing hose connections, solid gasket dressing etc. Temperature range: -55ºC - +204ºC. |
|
| | |
THREADLOCKERS |
Loctite® | ThreeBond® | Function - Description |
222 | 222 for 1/4" fasteners with 90 in/lbs break torque. |
| 1342 | Low-Strength Threadlocker & Sealant | An anaerobic (cures in the absence of air) sealant for thread fasteners. Best strength for small bolts and screws. Dismantle with normal tools. Prevents loosening due to vibration, thermal cycling or shock loading. Seals threads against leakage of fluids or gases. Seals threads against corrosion in chemical or marine environments. Resistant to all automotive fluids, oils, coolant and by-products. Temperature range: -55ºC - +150ºC. |
|
242, 243 | 242 for 1/4" to 3/4" fasteners with 115 in/lbs break torque. | 243 for 1/4" to 3/4" fasteners with 180 in/lbs break torque. |
| 1332N, 1322, 1324, 1324D, 1324N, | |
262, 271 | 262 for 3/8" to 1" fasteners with 168 in/lbs break torque. | 271 for 3/8" to 1" fasteners with 230 in/lbs break torque. |
| 1305, 1305N, 1305P | High-Strength Threadlocker & Sealant | An anaerobic (cures in the absence of air) sealant for thread fasteners. For heavy duty structural and safety applications, such as seat belt anchor bolts. Resistant to all automotive fluids, oils, coolant and by-products (exhaust). Prevents loosening due to vibration, thermal cycling or shock loading. Seals threads against leakage of fluids or gases. Seals threads against corrosion in chemical or marine environments. Temperature range: -55ºC - +150ºC. |
|
272 | 272 for 5/8" to 1" fasteners with 180 in/lbs break torque. |
| 1360, 1360N | High-Temperature, High-Strength Threadlocker & Sealant | An anaerobic (cures in the absence of air) sealant for thread fasteners. Resistant to all automotive fluids, oils, coolant and by-products (exhaust). For high-temperature applications from 135ºC - 235ºC. |
|
290 | 290 for #2 to 1/2" fasteners with 90 in/lbs break torque. |
| 1320N | Medium to High-Strength Wicking Threadlocker & Sealant | An anaerobic (cures in the absence of air) sealant. For post-assembly. For wicking action on final adjustment of set fasteners, apply to exposed threads. Prevents loosening due to vibration, thermal cycling or shock loading. Resistant to all automotive fluids, oils, coolant and by-products (exhaust). Seals threads against leakage and corrosion. Can be applied to metal components with porosity leaks - will wick into seal. Temperature range: -55ºC - + 150ºC. |
|
609 | 1377B | Medium to High-Strength Retainer | An anaerobic (cures in the absence of air) sealant. Medium to high strength, dismantle with press or pliers. High strength for pulleys, gears, sprockets, sleeves, pins, bushes and couplings. Excellent load transmission capabilities. Use for parts needing dismantling for maintenance or repairs. Prevents fretting corrosion. Seals joints against corrosion. Temperature range: -55ºC - + 150ºC. Cured strength: 16N/mm2 - 30N/mm2 (2,320 - 4,350 psi). Fills gaps to 0.25 mm (0.010"). |
|
620 | 1375B | High-Temperature, High-Strength Retainer | An anaerobic (cures in the absence of air) sealant. Permits bore re-sleeving of engines without heavy liner press fits. Reliable sealing of valve seat inserts. Dismantle with press or pliers. High temperature resistance. High strength for pulleys, gears, sprockets, sleeves, pins, bushes and couplings. Excellent load transmission capabilities. Use for parts needing dismantling for maintenance or repairs. Temperature range: -55ºC - +230ºC. Cured strength: 17N/mm2 - 37N/mm2 (2,470 - 5,370 psi). Fills gaps to 0.25 mm (0.010"). |
|
| | |
THREAD SEALANTS |
Loctite® | ThreeBond® | Function - Description |
567 Master Pipe Sealant | 1110B | Low to Medium Strength Pipe Sealant with Teflon | An anaerobic (cures in the absence of air) sealant for threads. Seals and locks threaded fittings against the effects of vibration, shock and thermal cycling. Easy to dismantle. Seals to moderate pressure instantly - maximum in 24 hours. Excellent resistance to fuel, hydraulic fluids, chemicals etc. Seals most metals - do not use on plastic fittings. Prevents thread corrosion and galling. Will not clog valves and orifices. Temperature range: -55ºC - +205ºC. Tested to 68.9 MPa (10,000 psi). |
|
569 Hydraulic Sealant | 1344 | Medium-Strength Pneumatic / Hydraulic Sealant | An anaerobic (cures in the absence of air) sealant. For sealing and locking fittings on high pressure hydraulic, pneumatic and fuel systems. Contains no fillers that could contaminate system fluids or foul fine lines and orifices. Dismantles with normal tools. Excellent resistance to hydraulic fluids and chemicals. Temperature range: -55ºC - + 150ºC. Tested to 68.9 MPa (10,000 psi). |
|
