Diesel Performance Parts
Performance Parts Finder
Select the Make of your vehicle from the list below.
Select your Engine Model.
Select the Part Type you're looking for.
Click Find Parts to see all available parts that match your search criteria.
ARP2000 Isuzu 4JX1TC & 4JJ1 HEAD STUD SET
This ARP head stud kit has been specially designed and manufactured for c engines. There are eighteen (18) studs with 18 washers and nuts to suit. These studs will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure. At 75% of the fasteners yield strength this head stud kit delivers a clamping load of 15060 lbs. This is an increase of 15% clamping load over OE head bolts. Set includes ARP Ultra-Torque lubricant. (ARP brand - made in USA)
Note: Thread in block needs to be tapped further to allow for studs longer thread
$738.74 inc. GST inc. GST
Balance Shaft Bush Set
Balance shaft "Finished" bush set to suit Toyota 1KZ, 1KD Series engines.
$43.89 inc. GST
Balance Shaft Bush Set
Balance Shaft Bush Set to suit Nissan ZD30 engines.
(ACL brand - made in Australia)
$50.82 inc. GST
Bearings Camshaft Set STD
Cam bearing set, standard size, to suit Toyota 1HD-FT and 1HD-FTE engines. (Taiho brand - made in Japan)
$44.66 inc. GST
Bearings Camshaft STD
Camshaft bearing standard size to suit Nissan TD42 series. Engine set. (NDC brand - made in Japan)
$15.02 inc. GST
Bearings Camshaft STD
Camshaft bearing standard size to suit Toyota 1HZ, 1HZ-T, 1HD-T series. (Taiho brand - made in Japan)
$12.17 inc. GST
Bearings Conrod STD
Conrod bearing, standard size, to suit Isuzu 4J Series engines. Sold as an engine set.
$41.58 inc. GST
Bearings Conrod STD
Conrod bearing, standard size, to suit Toyota 1KZ, 1KD & 2KD Series engines. Sold as an engine set.
$36.96 inc. GST
Bearings Conrod STD
Conrod bearing, standard size, to suit Toyota 1VD-FTV Series engines. Sold as an engine set.
$89.32 inc. GST
Bearings Conrod STD
ACL Duraglide 780 conrod bearing, standard size, to suit Toyota 1GD-FTV Series engines. Tri-metal construction. Sold as an engine set. (ACL brand)
$55.44 inc. GST
Bearings Conrod STD
Standard size, conrod bearing set to suit Nissan ZD30 engines. (Taiho brand)
$30.18 inc. GST
Bearings Conrod STD
ACL Duraglide, Conrod bearing set, standard size to suit R425 2.5L DURAMAX (LVN), R428 2.8L DURAMAX (LWH) & R428 2.8L DURAMAX II (LWN) engines in Holden Colorado 06/2012 onwards.
Sold as an engine set.
(ACL brand)
$58.21 inc. GST
Bearings Conrod 0.25 mm u/s
Conrod bearing, 0.25 mm undersize, to suit Isuzu 4J Series engines. Sold as an engine set.
Note: The crankshaft for this engine has been hardened by Nitriding or Tuftriding by the manufacturer. If grinding the shaft, it should be rehardened.
$41.58 inc. GST
Bearings Conrod 0.25 mm u/s
Conrod bearing, 0.25 mm undersize, to suit Toyota 1KZ, 1KD & 2KD Series engines. Sold as an engine set.
$36.96 inc. GST
Bearings Conrod 0.25 mm u/s
Conrod bearing, 0.25 mm undersize, to suit Toyota 1VD-FTV Series engines. Sold as an engine set.
$100.10 inc. GST
Bearings Conrod 0.25 mm u/s
ACL Duraglide 780 conrod bearing, 0.25 mm undersize, to suit Toyota 1GD-FTV Series engines. Tri-metal construction. Sold as an engine set. (ACL brand)
$55.44 inc. GST
Bearings Conrod 0.25 mm u/s
0.25 mm undersize, conrod bearing set to suit Nissan ZD30 engines. (Taiho brand)
$28.49 inc. GST
Bearings Conrod 0.25 mm u/s
ACL Duraglide, Conrod bearing set, 0.25 mm undersize to suit R425 2.5L DURAMAX (LVN), R428 2.8L DURAMAX (LWH) & R428 2.8L DURAMAX II (LWN) engines in Holden Colorado 06/2012 onwards.
Sold as an engine set.
(ACL brand)
$58.21 inc. GST
Bearings Conrod 0.50 mm u/s
Conrod bearing, 0.50 mm undersize, to suit Isuzu 4J Series engines. Sold as an engine set.
Note: The crankshaft for this engine has been hardened by Nitriding or Tuftriding by the manufacturer. If grinding the shaft, it should be rehardened.
$49.28 inc. GST
Bearings Conrod 0.50 mm u/s
Conrod bearing, 0.50 mm undersize, to suit Toyota 1KZ, 1KD & 2KD Series engines. Sold as an engine set.
$36.96 inc. GST
All prices include GST