Diesel Performance Parts
Performance Parts Finder
Select the Make of your vehicle from the list below.
Select your Engine Model.
Select the Part Type you're looking for.
Click Find Parts to see all available parts that match your search criteria.
Bolts Cylinder Head Set
Cylinder head bolt set to suit Toyota 1GD-FTV & 2GD-FTV engines. (Genuine)
$136.29 inc. GST
Bolts Cylinder Head Set
Cylinder head bolt set(10 bolts) to suit R425 2.5L DURAMAX (LVN), R428 2.8L DURAMAX (LWH) & R428 2.8L DURAMAX II (LWN) engines in Holden Colorado 06/2012 onwards.
(Genuine)
$P.O.A
Bolts ARP, Cummins 5.9L, 12 Valve, Cylinder Head Stud Set
ARP2000 Head Stud Set to suit Cummins 5.9L, 12 Valve, '89-'98
Black oxide finish.
Note: Modification of the rocker arm pedestals will be necessary to accommodate a shorter rocker arm pedestal head stud included in this kit.
$1,141.80 inc. GST
Bolts, Cylinder Head
Cylinder head bolt to suit Nissan ZD30DDT/DDTi engines.
Head bolts must be replaced, they cannot be reused.
(Permaseal brand)
$5.08 inc. GST
Bolts, Cylinder Head Set
Cylinder head bolt set to suit Nissan ZD30DDTiCFR engines.
Head bolts must be replaced, they cannot be reused.
(Ajusa brand)
$82.94 inc. GST
Bolts, ARP, Cummins 5.9L Flywheel Kit
ARP Flywheel Bolt Kit to suit Cummins 5.9L diesel, 2004 and earlier.
Includes washers.
Socket size 3/4 12pt
UHL 1.250”
Thread size M12 x 1.25
$169.40 inc. GST
Bolts, ARP, Nissan TD42 Flywheel Set
ARP Performance flywheel bolt set to suit Nissan TD42 series. Set of 7 bolts. (ARP brand - made in USA)
$140.91 inc. GST
Bolts, ARP2000, Nissan TD42 Head Stud Set
Cylinder head stud, washer and nut set by ARP to suit Nissan TD42 series. These studs will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure (ARP brand - made in USA)
$1,029.00 inc. GST
Bolts, ARP2000, Colorado, LVN, LWH, LWN Head Stud Kit
ARP2000 Performance cylinder head stud set to suit Holden Colorado's with R425 (LVN), R428 (LWH) and R428 (DURAMAX 2, LWN) engines. There are ten studs with washers and nuts to suit. No modification to head bolt holes in the block or head is required. These studs will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure. Set includes ARP Ultra-Torque lubricant.
(ARP brand - made in USA)
$657.80 inc. GST inc. GST
Bolts, ARP2000, Cummins ISB 5.9/QSB 5.9/ISB 6.7/QSB 6.7 Cylinder Head Stud Set (24 Valve)
ARP Head Stud Kit to suit 1998 onwards, Cummins, 24 valve, ISB 5.9/QSB 5.9/ISB 6.7/QSB 6.7.
ARP2000 material.
Set includes ARP Ultra-Torque lubricant.
(ARP brand - made in USA).
NOTE: It will be necessary to machine the lower rocker arm cover at the No. 24 bolt hole location in the torque sequence to allow clearance for the stud, nut and washer.
$1,141.80 inc. GST
Bolts, ARP2000, Ford Power stroke 6.7L Cylinder Head Stud Set
ARP Head Stud set to suit Ford Power stroke 6.7L
ARP2000 material.
Set includes ARP Ultra-Torque lubricant.
(ARP brand - made in USA).
$1,742.40 inc. GST
Bolts, ARP2000, Ford, P5AT/DT32 Head Stud Kit
ARP2000 Cylinder head stud set to suit Ford Ranger, Mazda BT-50 - Oct 2011 onwards, and Everest - Oct 2015 onwards with P5AT/DT32 (5Cyl, 3.2L) engines. These studs will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure.
Set contains:
10 x M8 studs, washers and nuts.
12 x M10 studs, washers and nuts.
1 x ARP Fastener Assembly Lubricant
Tensions:
M8 @ 44 N.m (32 Ft.lbs) This is a 10% increase over OE bolt tension
M10 @ 95 N.m (70 Ft.lbs) This is a 23% increase over OE bolt tension
(ARP brand - made in USA)
$1,124.20 inc. GST
Bolts, ARP2000, GM Duramax 6.6L Cylinder Head Stud Set
ARP Head Stud Kit to suit GM Duramax 6.6L (2001 & later) LB7/LLY/LBZ/LMM
ARP2000 material.
Set includes ARP Ultra-Torque lubricant.
(ARP brand - made in USA).
$1,551.00 inc. GST
Bolts, ARP2000, Toyota 1HD-FT & 1HD-FTE Cylinder Head Stud Set (11 mm diameter)
ARP2000 Performance cylinder head stud, washer and nut set to suit Toyota 1HD-FT & 1HD-FTE series. These studs are 11mm, direct replacement for the OE bolts. No modification to head bolt holes in the block or head is required. This will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure. ARP2000 material. Set includes ARP Ultra-Torque lubricant. (ARP brand - made in USA).
$1,167.24 inc. GST
Bolts, ARP2000, Toyota 1HD-FT and 1HD-FTE Cylinder Head Stud Set (1/2″ UNC)
ARP2000 Performance cylinder head stud set to suit Toyota 1HD-FT and 1HD-FTE series. There are twenty studs at 146mm length, 6 studs at 155.5mm length with washers and nuts to suit. These studs are 1/2" UNC. The head bolt holes in the block and head need to be modified to take these studs. These studs will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure. Set includes ARP Ultra-Torque lubricant. (ARP brand - made in USA)
$748.00 inc. GST
Bolts, ARP2000, Toyota 1HZ, 1HZ-T, 1HD-T Cylinder Head Stud Set (11mm)
Performance cylinder head stud, washer and nut set by ARP to suit Toyota 1HZ, 1HZ-T, 1HD-T series. These studs are 11mm, direct replacement for the OE bolts. No modification to head bolt holes in the block or head is required. This will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure.
ARP2000 material
(ARP brand - made in USA).
$1,167.10 inc. GST
Bolts, ARP2000, Toyota 1HZ, 1HZ-T, 1HD-T Head Stud Set (1/2″ UNC)
Performance Cylinder head stud, washer and nut set by ARP to suit Toyota 1HZ, 1HZ-T, 1HD-T series. These studs are 1/2" UNC to the block and will require the head bolt holes be drilled and tapped to suit. This will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure.
(ARP brand - made in USA)
$787.71 inc. GST
All prices include GST
