Diesel Performance Parts
Performance Parts Finder
Select the Make of your vehicle from the list below.
Select your Engine Model.
Select the Part Type you're looking for.
Click Find Parts to see all available parts that match your search criteria.
Cylinder Block Oil Orifice
Oil restrictor to suit Toyota KZ and KD series engines. Locates in top of cylinder block and restricts oil feed to the cylinder head. (Genuine)
$4.93 inc. GST
Cylinder Head
Genuine cylinder head to suit Mazda BT-50 - Oct 2011 onwards, Ford Ranger - up to 14 Sept 2015 with P5AT/DT32 (5Cyl, 3.2L) engines. Includes valves and springs. (29.5 degree inlet valve) (Genuine)
$P.O.A
Cylinder Head
Genuine cylinder head to suit Ford Ranger - 14 Sept 2015 onwards and Everest - Oct 2015 onwards with P5AT/DT32 (5Cyl, 3.2L) engines. Includes valves and springs. (44.5 degree inlet valve) (Genuine)
$P.O.A
Cylinder Head – DPP
Cylinder head to suit Holden Colorado and Isuzu DMAX up to 04/2012, "N" series Euro 4 spec engines up to 08/2013. Includes heater pipe and timing chain oil jet. (DPP brand - made in China)
$1,201.20 inc. GST
Cylinder Head – DPP
Cylinder head to suit Toyota Prado, Hilux and Hi-Ace with 1KD engines (DPP brand - made in China)
$1,178.10 inc. GST
Cylinder Head – DPP
Cylinder head to suit 1GD-FTV & 2GD-FTV engines. Includes 2 x straight pins. (DPP brand - made in China)
$1,379.95 inc. GST
Cylinder Head – DPP
Cylinder head to suit Nissan ZD30DDTiCFR engines. (DPP brand - made in China)
$1,300.20 inc. GST
Cylinder Head – DPP
Cylinder head to suit Nissan ZD30DDT/DDTi engines. (DPP brand - made in China)
$1,463.00 inc. GST
Cylinder Head – DPP Complete
"Complete" Cylinder head to suit Toyota Prado, Hilux and Hi-Ace with 1KD engines. Includes inlet and exhaust camshafts, valves, valve stem seals, springs, retainers and collets. (DPP brand - made in China)
$1,742.40 inc. GST
Cylinder Head – DPP Complete
Complete Cylinder head to suit Nissan ZD30DDT/DDTi engines.
Includes:
1 x Cylinder Head
2 x Camshaft
8 x Inlet Valves
8 x Exhaust Valves
16 x Valve Springs
16 x Valve Stem Seals
16 x Collets (Pairs)
16 Valve Spring Seats
16 x Valve Spring Retainers
16 x Valve Guides
(DPP brand - made in China)
$2,248.40 inc. GST
Cylinder Head Bolt Set
Cylinder head bolt set to suit Ford Ranger, Mazda BT-50 - Oct 2011 onwards, and Everest - Oct 2015 onwards with P5AT/DT32 (5Cyl, 3.2L) engines.
$58.52 inc. GST
Cylinder Head Cover – Hilux
Cylinder Head Cover to suit Toyota Hilux with 1KD and 2KD engines. Includes gasket and top injector seals. (Aftermarket - Made in China)
$130.90 inc. GST
Cylinder Head Cover – Hi-Ace / Prado
Cylinder Head Cover to suit Toyota Hi-Ace and Prado with 1KD and 2KD engines. Includes gasket and top injector seals. (Genuine)
$301.84 inc. GST
Cylinder Head DPP
Cylinder head replacement to suit Toyota 1HZ, 1HZ-T series. Fitted with stainless steel pre-combustion chambers and front end dowels. Includes manifold stud kit.
(DPP brand - made in China)
$1,670.90 inc. GST
Cylinder Head DPP (TD42T/Ti)
Cylinder head replacement to suit Nissan TD42T and Ti engines. Includes manifold bolts, studs and nuts.
(DPP brand - made in China)
$1,516.90 inc. GST inc. GST
Cylinder Head Genuine (Left)
Cylinder head (left) to suit Toyota 1VD-FTV series engines. (Genuine)
$1,771.00 inc. GST
Cylinder Head Genuine (Right)
Cylinder head (right) to suit Toyota 1VD-FTV series engines. (Genuine)
$1,771.00 inc. GST
Cylinder Head Stud Set – ARP
ARP2000 Performance cylinder head stud set to suit R425 2.5L DURAMAX (LVN), R428 2.8L DURAMAX (LWH) & R428 2.8L DURAMAX II (LWN) engines in Holden Colorado 06/2012 onwards. There are ten studs with washers and nuts to suit. No modification to head bolt holes in the block or head is required. These studs will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure. Set includes ARP Ultra-Torque lubricant.
Final torque of 285 N.m (210 Ft.lbs) will deliver 75% of the fasteners yield strength as clamping load (12837 kg / 28300 lbs). This is an increase of 9% clamping load over OE head bolts
(ARP brand - made in USA)
$657.80 inc. GST
Cylinder Head, Loaded, DPP
Loaded Cylinder head to suit Toyota 1HZ, 1HZ-T series.
Head is fitted with stainless steel pre-combustion chambers and front end dowels. Cam, cam bearing, thrust plate, cam followers, inlet & exhaust valves, valve stem seals, springs, seats, retainers & collets installed. Includes manifold stud kit. (DPP brand - made in China)
$0.00 inc. GST inc. GST
All prices include GST
