Diesel Performance Parts
Performance Parts Finder
Select the Make of your vehicle from the list below.
Select your Engine Model.
Select the Part Type you're looking for.
Click Find Parts to see all available parts that match your search criteria.
Piston STD, Pre-topped, High Performance
High Performance, pre-topped, replacement pistons to suit Toyota 1HZ-T engines. These pistons have alfin inserts in the top ring grooves, are pre-topped 0.15 mm in compression height, the body has been phosphated, crowns are anodised and coated with Cerakote piston coat (V-136), skirts are coated with Cerakote Micro Slick (P-109). They are oil gallery cooled and are supplied with the required oil squirters. They have 50% thicker crowns, extra top ring land clearance, increased under-crown radius and improved skirt and boss designs – no struts. Top ring grooves have been moved down 2.5 mm. 100% Ultrasonic tested for high-integrity Alfin insert bonding. Made from AC8A-T6 Eutectic aluminium. Piston crown weights optimised to maintain piston rock near or at T.D.C.
Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm.
Sold as an engine set including pistons, pins, circlips and squirters.
We offer the following 33mm pin, 1HZ-T/1HD-T conrods: High quality Aftermarket Conrod Set - CRTO350 or High Performance I-Beam Conrod Set - CRTO350B.
We recommend adding our Performance Ring Sets with Gapless Second Ring Technology – RSPTO350 STD
(DPP brand - Pistons are made in Taiwan)
(Cerakote® V-136 Piston Coat and Cerakote® P-109 Microslick coatings are applied in Australia)
Cerakote® V-Series High Temperature Ceramic Coatings are designed to protect metal substrates in high temperature applications. Cerakote V-Series High Temperature products are practical, performance-based coatings intended for exhaust systems and engine components. Additionally, Cerakote V-Series coatings are durable, resistant to thermal shock and designed to withstand extreme use temperatures of up to 1800°F - 980°C. This helps to maintain even heat distribution across the crown, which reduces softening and premature failure from extreme temperature hot spots. Reduced heat loss to the piston equates to better fuel burn rates, and increased power and fuel economy.
Cerakote® P-109 Microslick Dry Film Lubricant provides a low friction surface for metal-on-metal contact. This P-109 Microslick coating is formulated to withstand extreme temperatures (1,200°F - 648°C). This makes the coating ideal for pistons and other wear components in high temperature systems, and P-Series coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again high wear, galling and corrosion. It will help prevent piston scuffing in the bores in most marginal lubrication conditions.
$1,709.40 inc. GST
Piston 0.50mm oversize, Pre-topped, High Performance
Oversize 0.50 mm, High Performance, pre-topped, replacement pistons to suit Toyota 1HZ-T engines. These pistons have alfin inserts in the top ring grooves, are pre-topped 0.15 mm in compression height, the body has been phosphate, crowns are anodised and coated with Cerakote piston coat (V-136), skirts are coated with Cerakote Micro Slick (P-109). They are oil gallery cooled and are supplied with the required oil squirters. They have 50% thicker crowns, extra top ring land clearance, increased under-crown radius and improved skirt and boss designs – no struts. Top ring grooves have been moved down 2.5 mm. 100% Ultrasonic tested for high-integrity Alfin insert bonding. Made from AC8A-T6 Eutectic aluminium. Piston crown weights optimised to maintain piston rock near or at T.D.C. Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm.
Sold as an engine set including pistons, pins, circlips and squirters.
We offer the following 33mm pin, 1HZ-T/1HD-T conrods: High quality Aftermarket Conrod Set - CRTO350 or High Performance I-Beam Conrod Set - CRTO350B.
We recommend adding our Performance Ring Sets with Gapless Second Ring Technology – RSPTO350.50
(DPP brand - Pistons are made in Taiwan)
(Cerakote® V-136 Piston Coat and Cerakote® P-109 Microslick coatings are applied in Australia)
Cerakote® V-Series High Temperature Ceramic Coatings are designed to protect metal substrates in high temperature applications. Cerakote V-Series High Temperature products are practical, performance-based coatings intended for exhaust systems and engine components. Additionally, Cerakote V-Series coatings are durable, resistant to thermal shock and designed to withstand extreme use temperatures of up to 1800°F - 980°C. This helps to maintain even heat distribution across the crown, which reduces softening and premature failure from extreme temperature hot spots. Reduced heat loss to the piston equates to better fuel burn rates, and increased power and fuel economy.
Cerakote® P-109 Microslick Dry Film Lubricant provides a low friction surface for metal-on-metal contact. This P-109 Microslick coating is formulated to withstand extreme temperatures (1,200°F - 648°C). This makes the coating ideal for pistons and other wear components in high temperature systems, and P-Series coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again high wear, galling and corrosion. It will help prevent piston scuffing in the bores in most marginal lubrication conditions.
$1,709.40 inc. GST
Piston 1.00mm oversize, Pre-topped, High Performance
Oversize 1.00 mm, High Performance, pre-topped, replacement pistons to suit Toyota 1HZ-T engines. These pistons have alfin inserts in the top ring grooves, are pre-topped 0.15 mm in compression height, the body has been phosphate, crowns are anodised and coated with Cerakote piston coat (V-136), skirts are coated with Cerakote Micro Slick (P-109). They are oil gallery cooled and are supplied with the required oil squirters. They have 50% thicker crowns, extra top ring land clearance, increased under-crown radius and improved skirt and boss designs – no struts. Top ring grooves have been moved down 2.5 mm. 100% Ultrasonic tested for high-integrity Alfin insert bonding. Made from AC8A-T6 Eutectic aluminium. Piston crown weights optimised to maintain piston rock near or at T.D.C. Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm.
Sold as an engine set including pistons, pins, circlips and squirters.
We offer the following 33mm pin, 1HZ-T/1HD-T conrods: High quality Aftermarket Conrod Set - CRTO350 or High Performance I-Beam Conrod Set - CRTO350B.
We recommend adding our Performance Ring Sets with Gapless Second Ring Technology – RSPTO350.1.00
(DPP brand - Pistons are made in Taiwan)
(Cerakote® V-136 Piston Coat and Cerakote® P-109 Microslick coatings are applied in Australia)
Cerakote® V-Series High Temperature Ceramic Coatings are designed to protect metal substrates in high temperature applications. Cerakote V-Series High Temperature products are practical, performance-based coatings intended for exhaust systems and engine components. Additionally, Cerakote V-Series coatings are durable, resistant to thermal shock and designed to withstand extreme use temperatures of up to 1800°F - 980°C. This helps to maintain even heat distribution across the crown, which reduces softening and premature failure from extreme temperature hot spots. Reduced heat loss to the piston equates to better fuel burn rates, and increased power and fuel economy.
Cerakote® P-109 Microslick Dry Film Lubricant provides a low friction surface for metal-on-metal contact. This P-109 Microslick coating is formulated to withstand extreme temperatures (1,200°F - 648°C). This makes the coating ideal for pistons and other wear components in high temperature systems, and P-Series coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again high wear, galling and corrosion. It will help prevent piston scuffing in the bores in most marginal lubrication conditions.
$1,709.40 inc. GST
Piston STD, Performance, “Y” Crown Design
Performance, replacement piston set to suit Toyota 1HZ-T engines. Featuring new “Y” crown design for improved cylinder swirl and fuel/air mixing. These pistons are oil gallery cooled and are supplied with the required oil squirters. They have 50% thicker crowns, extra top ring land clearance, increased under-crown radius and improved skirt and boss designs – no struts. Top ring grooves have been moved down 2.5 mm. Full piston has been phosphated. 100% Ultrasonic tested for high-integrity Alfin insert bonding. Made from AC8A-T6 Eutectic aluminium. Piston crown weights optimised to maintain piston rock near or at T.D.C. Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm.
Sold as an engine set including pistons, pins, circlips and squirters.
We recommend Diesel Performance Parts billet, I-beam conrods with ARP2000 conrod bolts, ACL Race series crankshaft bearings and Diesel Performance Parts ring sets with Total Seal Gapless 2nd Ring Technology
(DPP brand - made in Taiwan)
$1,155.00 inc. GST inc. GST
Piston 0.50mm oversize, Performance, “Y” Crown Design
Oversize 0.50mm, Performance, replacement piston set to suit Toyota 1HZ-T engines. Featuring new “Y” crown design for improved cylinder swirl and fuel/air mixing. These pistons are oil gallery cooled and are supplied with the required oil squirters. They have 50% thicker crowns, extra top ring land clearance, increased under-crown radius and improved skirt and boss designs – no struts. Top ring grooves have been moved down 2.5 mm. Full piston has been phosphated. 100% Ultrasonic tested for high-integrity Alfin insert bonding. Made from AC8A-T6 Eutectic aluminium. Piston crown weights optimised to maintain piston rock near or at T.D.C. Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm.
Sold as an engine set including pistons, pins, circlips and squirters.
We recommend Diesel Performance Parts billet, I-beam conrods with ARP2000 conrod bolts, ACL Race series crankshaft bearings and Diesel Performance Parts ring sets with Total Seal Gapless 2nd Ring Technology
(DPP brand - made in Taiwan)
$1,155.00 inc. GST inc. GST
Piston 1.00mm oversize, Performance, “Y” Crown Design
Oversize 1.00mm, Performance, replacement piston set to suit Toyota 1HZ-T engines. Featuring new “Y” crown design for improved cylinder swirl and fuel/air mixing. These pistons are oil gallery cooled and are supplied with the required oil squirters. They have 50% thicker crowns, extra top ring land clearance, increased under-crown radius and improved skirt and boss designs – no struts. Top ring grooves have been moved down 2.5 mm. Full piston has been phosphated. 100% Ultrasonic tested for high-integrity Alfin insert bonding. Made from AC8A-T6 Eutectic aluminium. Piston crown weights optimised to maintain piston rock near or at T.D.C.
Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm.
Sold as an engine set including pistons, pins, circlips and squirters.
We recommend Diesel Performance Parts billet, I-beam conrods with ARP2000 conrod bolts, ACL Race series crankshaft bearings and Diesel Performance Parts ring sets with Total Seal Gapless 2nd Ring Technology
(DPP brand - made in Taiwan)
$1,155.00 inc. GST inc. GST
Piston STD, Pre-topped, Performance, “Y” Crown Design
Performance, pre-topped, replacement piston set to suit Toyota 1HZ-T engines. Featuring new “Y” crown design for improved cylinder swirl and fuel/air mixing. These pistons are oil gallery cooled and are supplied with the required oil squirters. They are pre-topped 0.15 mm in compression height, have 50% thicker crowns, extra top ring land clearance, increased under-crown radius and improved skirt and boss designs – no struts. Top ring grooves have been moved down 2.5 mm. Full piston has been phosphated. 100% Ultrasonic tested for high-integrity Alfin insert bonding. Made from AC8A-T6 Eutectic aluminium. Piston crown weights optimised to maintain piston rock near or at T.D.C.
Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm.
Sold as an engine set including pistons, pins, circlips and squirters.
We recommend Diesel Performance Parts billet, I-beam conrods with ARP2000 conrod bolts, ACL Race series crankshaft bearings and Diesel Performance Parts ring sets with Total Seal Gapless 2nd Ring Technology
(DPP brand - made in Taiwan)
$1,201.20 inc. GST inc. GST
Piston 0.50mm oversize, Pre-topped, Performance, “Y” Crown Design
Oversize 0.50mm, Performance, pre-topped, replacement piston set to suit Toyota 1HZ-T engines. Featuring new “Y” crown design for improved cylinder swirl and fuel/air mixing. These pistons are oil gallery cooled and are supplied with the required oil squirters. They are pre-topped 0.15 mm in compression height, have 50% thicker crowns, extra top ring land clearance, increased under-crown radius and improved skirt and boss designs – no struts. Top ring grooves have been moved down 2.5 mm. Full piston has been phosphated. 100% Ultrasonic tested for high-integrity Alfin insert bonding. Made from AC8A-T6 Eutectic aluminium. Piston crown weights optimised to maintain piston rock near or at T.D.C.
Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm.
Sold as an engine set including pistons, pins, circlips and squirters.
We recommend Diesel Performance Parts billet, I-beam conrods with ARP2000 conrod bolts, ACL Race series crankshaft bearings and Diesel Performance Parts ring sets with Total Seal Gapless 2nd Ring Technology
(DPP brand - made in Taiwan)
$1,201.20 inc. GST inc. GST
Piston 1.00mm oversize, Pre-topped, Performance, “Y” Crown Design
Oversize 1.00mm, Performance, pre-topped, replacement piston set to suit Toyota 1HZ-T engines. Featuring new “Y” crown design for improved cylinder swirl and fuel/air mixing. These pistons are oil gallery cooled and are supplied with the required oil squirters. They are pre-topped 0.15 mm in compression height, have 50% thicker crowns, extra top ring land clearance, increased under-crown radius and improved skirt and boss designs – no struts. Top ring grooves have been moved down 2.5 mm. Full piston has been phosphated. 100% Ultrasonic tested for high-integrity Alfin insert bonding. Made from AC8A-T6 Eutectic aluminium. Piston crown weights optimised to maintain piston rock near or at T.D.C.
Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm.
Sold as an engine set including pistons, pins, circlips and squirters.
We recommend Diesel Performance Parts billet, I-beam conrods with ARP2000 conrod bolts, ACL Race series crankshaft bearings and Diesel Performance Parts ring sets with Total Seal Gapless 2nd Ring Technology
(DPP brand - made in Taiwan)
$1,201.20 inc. GST inc. GST
Piston Ring SET STD
Standard size ring set to suit Toyota 1VD-FTV engines.
Top ring 2.0 mm parallel, 2nd Ring 1.5 mm, Oil ring 2.0 mm.
Sold as an engine set.
$230.38 inc. GST
Piston Ring SET 0.50 mm oversize
0.50 mm oversize piston ring set to suit Toyota 1VD-FTV engines.
Top ring 2.0 mm parallel, 2nd Ring 1.5 mm, Oil ring 2.0 mm.
Sold as an engine set.
$230.38 inc. GST
Piston Ring SET 1.00 mm oversize
1.00 mm oversize piston ring set to suit Toyota 1VD-FTV engines.
Top ring 2.0 mm parallel, 2nd Ring 1.5 mm, Oil ring 2.0 mm.
Sold as an engine set.
$230.38 inc. GST
Piston STD (engines up to 8’1992)
Standard replacement piston to suit Toyota 1HD-T engines up to 8'1992. Piston includes pin and circlips. This piston is strutted and has an alfin insert in the top ring groove. Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm. Piston ring set required RSTO350 STD. Sold as an engine set. To fit these pistons you will require O.E. 1HD-T conrods, CRTO350 or CRTO350B. (DPP brand - made in Taiwan)
$729.96 inc. GST
Piston STD, Pre-topped, High Performance, “Y” Crown Design
High Performance, pre-topped, replacement piston set to suit Toyota 1HZ-T engines. Featuring new “Y” crown design for improved cylinder swirl and fuel/air mixing. These pistons have alfin inserts in the top ring grooves, are pre-topped 0.15 mm in compression height, full piston has been phosphated, crowns are anodised and coated with Cerakote piston coat (V-136), skirts are coated with Cerakote Micro Slick (P-109). They are oil gallery cooled and are supplied with the required oil squirters. They have 50% thicker crowns, extra top ring land clearance, increased under-crown radius and improved skirt and boss designs – no struts. Top ring grooves have been moved down 2.5 mm. 100% Ultrasonic tested for high-integrity Alfin insert bonding. Made from AC8A-T6 Eutectic aluminium. Piston crown weights optimised to maintain piston rock near or at T.D.C.
Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm.
Sold as an engine set including pistons, pins, circlips and squirters.
We recommend Diesel Performance Parts billet, I-beam conrods with ARP2000 conrod bolts, ACL Race series crankshaft bearings and Diesel Performance Parts ring sets with Total Seal Gapless 2nd Ring Technology
(DPP brand - Pistons are made in Taiwan)
(Cerakote® V-136 Piston Coat and Cerakote® P-109 Microslick coatings are applied in Australia)
Cerakote® V-Series High Temperature Ceramic Coatings are designed to protect metal substrates in high temperature applications. Cerakote V-Series High Temperature products are practical, performance-based coatings intended for exhaust systems and engine components. Additionally, Cerakote V-Series coatings are durable, resistant to thermal shock and designed to withstand extreme use temperatures of up to 1800°F - 980°C. This helps to maintain even heat distribution across the crown, which reduces softening and premature failure from extreme temperature hot spots. Reduced heat loss to the piston equates to better fuel burn rates, and increased power and fuel economy.
Cerakote® P-109 Microslick Dry Film Lubricant provides a low friction surface for metal-on-metal contact. This P-109 Microslick coating is formulated to withstand extreme temperatures (1,200°F - 648°C). This makes the coating ideal for pistons and other wear components in high temperature systems, and P-Series coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again high wear, galling and corrosion. It will help prevent piston scuffing in the bores in most marginal lubrication conditions.
$1,663.20 inc. GST inc. GST
Piston 0.50 mm oversize (engines up to 8’1992)
Oversize 0.50 mm replacement piston to suit Toyota 1HD-T engines up to 8'1992. Piston includes pin and circlips. This piston is strutted and has an alfin insert in the top ring groove. Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm. Piston ring set required RSTO350.50. Sold as an engine set. To fit these pistons you will require O.E. 1HD-T conrods, CRTO350 or CRTO350B. (DPP brand - made in Taiwan)
$729.96 inc. GST
Piston 0.50mm oversize, Pre-topped, High Performance, “Y” Crown Design
Oversize 0.50mm, High Performance, pre-topped, replacement piston set to suit Toyota 1HZ-T engines. Featuring new “Y” crown design for improved cylinder swirl and fuel/air mixing. These pistons have alfin inserts in the top ring grooves, are pre-topped 0.15 mm in compression height, full piston has been phosphated, crowns are anodised and coated with Cerakote piston coat (V-136), skirts are coated with Cerakote Micro Slick (P-109). They are oil gallery cooled and are supplied with the required oil squirters. They have 50% thicker crowns, extra top ring land clearance, increased under-crown radius and improved skirt and boss designs – no struts. Top ring grooves have been moved down 2.5 mm. 100% Ultrasonic tested for high-integrity Alfin insert bonding. Made from AC8A-T6 Eutectic aluminium. Piston crown weights optimised to maintain piston rock near or at T.D.C.
Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm.
Sold as an engine set including pistons, pins, circlips and squirters.
We recommend Diesel Performance Parts billet, I-beam conrods with ARP2000 conrod bolts, ACL Race series crankshaft bearings and Diesel Performance Parts ring sets with Total Seal Gapless 2nd Ring Technology
(DPP brand - Pistons are made in Taiwan)
(Cerakote® V-136 Piston Coat and Cerakote® P-109 Microslick coatings are applied in Australia)
Cerakote® V-Series High Temperature Ceramic Coatings are designed to protect metal substrates in high temperature applications. Cerakote V-Series High Temperature products are practical, performance-based coatings intended for exhaust systems and engine components. Additionally, Cerakote V-Series coatings are durable, resistant to thermal shock and designed to withstand extreme use temperatures of up to 1800°F - 980°C. This helps to maintain even heat distribution across the crown, which reduces softening and premature failure from extreme temperature hot spots. Reduced heat loss to the piston equates to better fuel burn rates, and increased power and fuel economy.
Cerakote® P-109 Microslick Dry Film Lubricant provides a low friction surface for metal-on-metal contact. This P-109 Microslick coating is formulated to withstand extreme temperatures (1,200°F - 648°C). This makes the coating ideal for pistons and other wear components in high temperature systems, and P-Series coatings maintain excellent adhesion even after repeated thermal cycling. These coatings provide superior protection again high wear, galling and corrosion. It will help prevent piston scuffing in the bores in most marginal lubrication conditions.
$1,663.20 inc. GST inc. GST
Piston 1.00 mm oversize (engines up to 8’1992)
Oversize 1.00 mm replacement piston to suit Toyota 1HD-T engines up to 8'1992. Piston includes pin and circlips. This piston is strutted and has an alfin insert in the top ring groove. Top ring 2.0 mm 1/2 keystone, 2nd ring 2.0 mm, Oil ring 4.0 mm, Gudgeon pin diameter: 33.0 mm. Piston ring set required RSTO350.1.00. Sold as an engine set. To fit these pistons you will require O.E. 1HD-T conrods, CRTO350 or CRTO350B. (DPP brand - made in Taiwan)
$729.96 inc. GST
Piston Ring Set STD (Gen Piston > 04/’04)
Standard size ring set to suit Genuine Piston, up to 04/'04, in Nissan ZD30 DDT, ZD30 DDTi and TD27Ti engines.
Top ring 2.5 mm 1/2 keystone, 2nd Ring 2.00 mm, Oil ring 3.0 mm.
Sold as an engine set.
(NPR brand)
$161.70 inc. GST
Piston Ring Set 0.50 mm oversize (Gen Piston > 04/’04)
0.50 mm oversize piston ring set to suit Genuine Piston, up to 04/'04, in Nissan ZD30 DDT, ZD30 DDTi and TD27Ti engines. Top ring 2.5 mm 1/2 keystone, 2nd Ring 2.0 mm, Oil ring 3.0 mm.
Sold as an engine set.
(NPR brand)
$161.70 inc. GST
Piston Ring Set 1.00 mm oversize (Gen Piston > 04/’04)
1.00 mm oversize piston ring set to suit Genuine Piston, up to 04/'04, in Nissan ZD30 DDT, ZD30 DDTi and TD27Ti engines. Top ring 2.5 mm 1/2 keystone, 2nd Ring 2.0 mm, Oil ring 3.0 mm.
Sold as an engine set.
(NPR brand)
$161.70 inc. GST
All prices include GST
