Diesel Performance Parts
Performance Parts Finder
Select the Make of your vehicle from the list below.
Select your Engine Model.
Select the Part Type you're looking for.
Click Find Parts to see all available parts that match your search criteria.
HEAD STUD KIT ARP2000, NISSAN ZD30 DDTi HPCFR
This ARP head stud kit has been specially designed and manufactured for Nissan ZD30 DDTi HPCFR engines.
There are eighteen (18) studs with 18 washers and nuts to suit and four (4) special injector clamp nuts. These studs will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure.
At 75% of the fasteners yield strength these head studs deliver a clamping load of 19000 lbs. This is an increase of 17% clamping load over OE head bolts.
At 85% of the fasteners yield strength these head studs deliver a clamping load of 21500 lbs. This is an increase of 32% clamping load over OE head bolts.
Set includes ARP Ultra-Torque lubricant.
(ARP brand - made in USA)
$1,172.60 inc. GST inc. GST
HEAD STUD SET ARP2000, NISSAN ZD30 DDT & DDTi
This ARP head stud kit has been specially designed and manufactured for Nissan ZD30 DDT and DDTi engines. There are eighteen (18) studs with 18 washers and nuts to suit. These studs will help gain the increased head clamping required in performance applications. They will achieve a more evenly distributed and accurate torque load compared to that of head bolts by eliminating the twisting force created during tightening. This ultimately translates into higher reliability and a lower chance of head gasket failure.
At 75% of the fasteners yield strength these head studs deliver a clamping load of 19000 lbs. This is an increase of 17% clamping load over OE head bolts.
At 85% of yield strength these head studs deliver a clamping load of 21500 lbs. This is an increase of 32% clamping load over OE head bolts.
Set includes ARP Ultra-Torque lubricant.
(ARP brand - made in USA)
$986.70 inc. GST inc. GST
HI-FLOW FAN AND HUB – NISSAN TD42
Hi-Flow Fan and Hub Kit to suit Nissan TD42 engines. The kit includes the fan and viscous hub (bolted together), viscous hub to water pump pulley adaptor, all nuts and studs required for installation.
In-house testing on two different vehicles saw up to 4°C drop in engine cooling system temperatures across the radiator with back-to-back testing of the standard fan and viscous hub compared to the Diesel Performance Parts hi-flow fan and viscous hub. Under some conditions the drop was even higher.
$561.66 inc. GST inc. GST
Injector Seal Set
Injector Seal set to suit Nissan ZD30DDT and ZD30DDTi engines.
(DPP brand - made in Taiwan)
$36.34 inc. GST
Injector Washer Kit
Injector Washer Kit to suit Nissan ZD30DDT and ZD30DDTi engines.
(DPP brand - made in Taiwan)
$12.32 inc. GST
Injector Washer Kit
Injector Washer Kit to suit Nissan ZD30DDTiCFR engines.
(DPP brand - made in Taiwan)
$24.64 inc. GST
Injector fuel leak off pipe
Injector fuel leak off pipe to suit Toyota 1HZ.
OE reference 23761-17010
(Genuine)
$161.70 inc. GST inc. GST
Injector fuel leak off pipe – Aftermarket
Aftermarket injector fuel leak-off pipe to suit Toyota 1HD-T is a direct replacement for Toyota 23761-17020.
It is common for the O.E. pipes to corrode and/or get damaged after many years of use or abuse.
They are no longer available from Toyota or Yanmar.
(Diesel Power Parts - brand Made in Turkey)
$223.30 inc. GST inc. GST
Injector Pump – VDJ200 >08/’15, VDJ7# >08/’16
Injector Pump to suit Toyota 1VD-FTV engines - VDJ200 >08/'15, VDJ7# >08/'16. (Genuine)
$1,771.00 inc. GST
Injector Pump Mounting Oring
Injector Pump Mounting Oring to suit Toyota 1KZ-TE and 1HD-FTE engines. (Genuine)
$4.62 inc. GST
Injector washer kit
Injector washer kit to suit Toyota 1GD & 2GD engines.
(Genuine Injector seats)
$37.99 inc. GST inc. GST
Inlet Manifold Clean Gasket Kit
Gaskets required when cleaning Toyota 1VD-FTV Inlet Manifold.
BOM Contents:
2 x GIMTO900, INLET MANIFOLD GASKET TO HEAD
1 x GIMTO900L, INLET MANIFOLD GASKET, SPACER TO INTAKE, LEFT SIDE
1 x GIMTO900R, INTAKE MANIFOLD GASKET, SPACER TO INTAKE, RIGHT SIDE
1 x GMTO900F, INTAKE FLANGE GASKET
2 x GMTO900G, EGR INLET GASKET
2 x GMTO900H, THROTTLE BODY GASKET
1 x GMTO900I, AIR TUBE GASKET
1 x GMTO900J, AIR TUBE GASKET #3
$169.40 inc. GST inc. GST
Inlet Valve – Performance
Performance inlet valve to suit Isuzu 4JJ1 engines.
Designed and manufactured for high performance diesel applications. These inlet valve bodies are one-piece forgings made of Non-magnetic 21-4N stainless steel and the stem ends are tipped with induction hardened 4Cr9Si2 friction welded, steel wafers. All valve bodies are fully Nitride hardened. The valve heads are fully machined, and the underside radii are swirl polished right to the valve face to promote better air flow and combustion chamber swirl. All valves have a 30° back-cut up to valve faces.
The valve body and valve face metals have been selected and prepared to withstand high temperature conditions, high stress applications and highly corrosive combustion chamber atmospheres – the standard environment for a high-performance diesel engine.
Sold in multiples of 8
Diesel Performance Parts brand - made in Taiwan.
Rodeo, Colorado, Dmax > 05/2014
Dmax 06/2014>08/'20, MUX 12/2013>08/'20
N Series 10/2007>
$32.34 inc. GST inc. GST
Inlet Valve – Performance
Performance inlet valve to suit Toyota 1KD-FTV engines.
Designed and manufactured for high performance diesel applications. These inlet valve bodies are one-piece forgings made of Non-magnetic 21-4N stainless steel and the stem ends are tipped with induction hardened 4Cr9Si2 friction welded, steel wafers. All valve bodies are fully Nitride hardened. The valve heads are fully machined, and the underside radii are swirl polished right to the valve face to promote better air flow and combustion chamber swirl. All valves have a 30° back-cut up to valve faces. The valve body and valve face metals have been selected and prepared to withstand high temperature conditions, high stress applications and highly corrosive combustion chamber atmospheres – the standard environment for a high-performance diesel engine.
Sold in multiples of 8
Diesel Performance Parts brand - Made in Taiwan.
$40.04 inc. GST inc. GST
Inlet Valve – Performance
Performance inlet valve to suit Toyota 1GD-FTV & 2GD-FTV engines.
Designed and manufactured for high performance diesel applications. These inlet valve bodies are one-piece forgings made of Non-magnetic 21-4N stainless steel and the stem ends are tipped with induction hardened 4Cr9Si2 friction welded, steel wafers. All valve bodies are fully Nitride hardened. The valve heads are fully machined, and the underside radii are swirl polished right to the valve face to promote better air flow and combustion chamber swirl. All valves have a 30° back-cut up to valve faces. The valve body and valve face metals have been selected and prepared to withstand high temperature conditions, high stress applications and highly corrosive combustion chamber atmospheres – the standard environment for a high-performance diesel engine.
Sold in multiples of 8
Diesel Performance Parts brand - made in Taiwan.
$32.34 inc. GST inc. GST
Inlet Valve – Performance
Performance inlet valve to suit Nissan ZD30 series engines.
Diesel Performance Parts valves are designed and manufactured for high performance diesel applications. The valve bodies are one-piece (head and stem) forgings made of JIS SUH35 (21-4N) Non-magnetic, stainless steel. The stem ends are tipped with induction hardened 4Cr9Si2, friction welded, steel wafers. Valve bodies are fully Nitride hardened. The valve heads are fully machined, and the underside radii are swirl polished right to the valve face to promote better air flow and combustion chamber swirl. They have a 30° back-cut up to the 45° valve faces. The valve body and valve face metals have been selected and prepared to withstand high temperature conditions, high stress applications and highly corrosive combustion chamber atmospheres – the standard environment for a high-performance diesel engine.
(Diesel Performance Parts brand - made in Taiwan)
$27.10 inc. GST inc. GST
Inlet Valve – Performance 30° (Ford >14/09/15, All Mazda)
Performance 30° inlet valve to suit Ford Ranger - up to 14/09/2015 and Mazda BT-50 - 10/2011 onwards, with P5AT/DT32 (5Cyl, 3.2L) engines.
Designed and manufactured for high performance diesel applications. These inlet valve bodies are one-piece forgings made of Non-magnetic 21-4N stainless steel and the stem ends are tipped with induction hardened 4Cr9Si2 friction welded, steel wafers. All valve bodies are fully Nitride hardened. The valve heads are fully machined, and the underside radii are swirl polished right to the valve face to promote better air flow and combustion chamber swirl. All valves have a 25° back-cut up to valve faces.
The valve body and valve face metals have been selected and prepared to withstand high temperature conditions, high stress applications and highly corrosive combustion chamber atmospheres – the standard environment for a high-performance diesel engine.
These valves can be purchased individually.
Diesel Performance Parts brand - made in Taiwan
$32.34 inc. GST inc. GST
Inlet Valve – Performance 45° (Ford 15/9/2015 onwards)
Performance 45° inlet valve to suit Ford Ranger 15/9/2015 onwards with DT32 (5Cyl, 3.2L) engines.
Designed and manufactured for high performance diesel applications. These inlet valve bodies are one-piece forgings made of Non-magnetic 21-4N stainless steel and the stem ends are tipped with induction hardened 4Cr9Si2 friction welded, steel wafers. All valve bodies are fully Nitride hardened. The valve heads are fully machined, and the underside radii are swirl polished right to the valve face to promote better air flow and combustion chamber swirl. All valves have a 30° back-cut up to valve faces.
The valve body and valve face metals have been selected and prepared to withstand high temperature conditions, high stress applications and highly corrosive combustion chamber atmospheres – the standard environment for a high-performance diesel engine.
Sold in quantities of 10
(Diesel Performance Parts brand - made in Taiwan)
---Does not Suit Mazda cylinder head---
$33.88 inc. GST inc. GST
Lash Adjuster
Hydraulic Lash Adjuster to suit Toyota 1VD-FTV, 1GD-FTV and 2GD-FTV engines. Can be purchased individually.
$36.19 inc. GST
All prices include GST
