Diesel Performance Parts
Performance Parts Finder
Select the Make of your vehicle from the list below.
Select your Engine Model.
Select the Part Type you're looking for.
Click Find Parts to see all available parts that match your search criteria.
Fuel Injector Nozzle Holder Seal Set
Set of 4 Fuel Injector Nozzle Holder Seals to suit Toyota 1KD and 2KD engines. (DPP brand - made in Taiwan)
$18.48 inc. GST
Fuel Injector Washer
Fuel injector washer kit to suit Toyota 1HD-FT engines (DPP brand - Made in Taiwan)
$53.90 inc. GST
Fuel Injector Washer >
Fuel injector washer kit to suit Toyota 1HD-FTE engines (DPP brand - Made in Taiwan)
$53.90 inc. GST
Fuel Injector Washer >01/2012
Fuel injector washer to suit Toyota 1VD-FTV engines up to 01/2012. 16.9 x 7.55 x 3.00mm (Genuine)
$20.02 inc. GST
Fuel Injector Washer 01/2012>
Fuel injector washer to suit Toyota 1VD-FTV engines 01/2012 onwards. 16.9 x 7.55 x 3.50mm (Genuine)
$13.29 inc. GST
Fuel Injector Washer Kit
Fuel injector washer kit to suit Ford Ranger, Mazda BT-50 - Oct 2011 onwards, and Everest - Oct 2015 onwards with P5AT/DT32 (5Cyl, 3.2L) engines. (DPP brand - made in Taiwan)
$29.26 inc. GST
Fuel Injector Washer Kit
Fuel injector washer kit to suit Isuzu 4JJ1TC engines. (DPP brand - made in Taiwan)
$30.80 inc. GST
Fuel Injector Washer Kit
Fuel injector washer kit to suit Toyota 1KD and 2KD engines (DPP brand - made in Taiwan)
$30.80 inc. GST
Gasket Cylinder Head Left – Grade A
Left bank Grade A multi-layer steel head gasket to suit Toyota 1VD-FTV engines.
1 Notch. Use for piston protrusions between 0.520 - 0.575 mm.
Head bolt diameters must be checked.
(Genuine)
$123.20 inc. GST
Gasket Cylinder Head Left – Grade C
Left bank Grade C multi-layer steel head gasket to suit Toyota 1VD-FTV engines.
3 Notch. Use for piston protrusions between 0.625 - 0.675 mm.
Head bolt diameters must be checked.
(Genuine)
$123.20 inc. GST
Gasket Cylinder Head Left – Grade E
Left bank Grade E multi-layer steel head gasket to suit Toyota 1VD-FTV engines.
5 Notch. Use for piston protrusions between 0.725 - 0.780 mm.
Head bolt diameters must be checked.
(Genuine)
$123.20 inc. GST
Gasket Cylinder Head Right – Grade A
Right bank Grade A multi-layer steel head gasket to suit Toyota 1VD-FTV engines.
1 Notch. Use for piston protrusions between 0.520 - 0.575 mm.
Head bolt diameters must be checked.
(Genuine)
$123.20 inc. GST
Gasket Cylinder Head Right – Grade C
Right bank Grade C multi-layer steel head gasket to suit Toyota 1VD-FTV engines.
3 Notch. Use for piston protrusions between 0.625 - 0.675 mm.
Head bolt diameters must be checked.
(Genuine)
$123.20 inc. GST
Gasket Cylinder Head Right – Grade E
Right bank Grade E multi-layer steel head gasket to suit Toyota 1VD-FTV engines.
5 Notch. Use for piston protrusions between 0.725 - 0.780 mm.
Head bolt diameters must be checked.
(Genuine)
$123.20 inc. GST
Gasket Head Shim Left 0.25 mm
Left bank, 0.25 mm thick, DPP Head Gasket Shim to suit Toyota 1VD-FTV engines. These shims are laser-cut from mild steel and match the appropriate cylinder head gasket geometry. They can be used on diesel engines where the cylinder block has been machined to correct surface distortion or surface finish and the piston protrusion height is excessive. Or with pistons that have anodised or ceramic crowns and it is not possible to machine the crowns to correct the protrusion, using this DPP Shim will compensate for the excessive protrusion.
(DPP Brand, Made in Australia)
$200.20 inc. GST
Gasket Head Shim Left 0.40 mm
Left bank, 0.40 mm thick, DPP Head Gasket Shim to suit Toyota 1VD-FTV engines. These shims are laser-cut from mild steel and match the appropriate cylinder head gasket geometry. They can be used on diesel engines where the cylinder block has been machined to correct surface distortion or surface finish and the piston protrusion height is excessive. Or with pistons that have anodised or ceramic crowns and it is not possible to machine the crowns to correct the protrusion, using this DPP Shim will compensate for the excessive protrusion.
(DPP Brand, Made in Australia)
$235.62 inc. GST
Gasket Head Shim Right 0.25 mm
Right bank, 0.25 mm thick, DPP Head Gasket Shim to suit Toyota 1VD-FTV engines. These shims are laser-cut from mild steel and match the appropriate cylinder head gasket geometry. They can be used on diesel engines where the cylinder block has been machined to correct surface distortion or surface finish and the piston protrusion height is excessive. Or with pistons that have anodised or ceramic crowns and it is not possible to machine the crowns to correct the protrusion, using this DPP Shim will compensate for the excessive protrusion.
(DPP Brand, Made in Australia)
$235.62 inc. GST
Gasket Head Shim Right 0.40 mm
Right bank, 0.40 mm thick, DPP Head Gasket Shim to suit Toyota 1VD-FTV engines. These shims are laser-cut from mild steel and match the appropriate cylinder head gasket geometry. They can be used on diesel engines where the cylinder block has been machined to correct surface distortion or surface finish and the piston protrusion height is excessive. Or with pistons that have anodised or ceramic crowns and it is not possible to machine the crowns to correct the protrusion, using this DPP Shim will compensate for the excessive protrusion.
(DPP Brand, Made in Australia)
$235.62 inc. GST
Gasket Full Set, no head gasket, Single Turbo, >01/2012(for 01/2012 > 08/2016 add 8 x IWTO900A)
Genuine Toyota 1VD-FTV Full gasket set to suit Landcruiser >01/'2012 'UTE' (single turbo).
Set includes: 3.00mm thick injector washers (see IWKTO900).
This gasket set does not include head gasket (graded head gasket determined by piston protrusion)
(Genuine)
NOTE: For 01/2012 > 08/2016 applications, qty 8, 3.50mm thick Injector washers are required, see our injector washer IWKTO900A. Failing to fit the correct injector washers could compromise the engines performance, fuel economy or power.
$970.20 inc. GST
Gasket Full Set, no head gasket, Twin Turbo, >01/2012(for 01/2012 > 08/2015 add 8 x IWTO900A)
Genuine Toyota 1VD-FTV Full gasket set to suit Landcruiser >01/'12 Landcruiser 'Wagon" (twin turbo)
Set includes: 3.00mm thick injector washers (see IWKTO900).
This gasket set does not include head gasket (graded head gasket determined by piston protrusion)
(Genuine)
NOTE: For 01/2012 > 08/2015 applications, qty 8, 3.50mm thick Injector washers are required, see our injector washer kit IWKTO900A. Failing to fit the correct injector washers could compromise the engines performance, fuel economy or power.
$893.20 inc. GST
All prices include GST
